如今大家早已進入了技術時代，包括服飾、食品類別、機械結構等，現階段超聲波清洗機已廣泛應用于表面鍍膜、機械制造、電子元器件制造、醫療器械制造、半導體制造、表業和珠寶眼鏡制造、紡織品制造和染色等加工元器件制造領域，使超聲波清洗機清理的實際效果很好，也是有一些要素會使清洗設備的清理效果并不是很好。

Now everyone has already entered the era of technology, including clothing, food category, mechanical structure, etc. at this stage, ultrasonic cleaning machines have been widely used in surface coating, machinery manufacturing, electronic component manufacturing, medical device manufacturing, semiconductor manufacturing, watch and jewelry manufacturing, textile manufacturing, dyeing and other processing component manufacturing fields, Make the actual effect of ultrasonic cleaning machine cleaning is very good, but also some elements will make the cleaning effect of cleaning equipment is not very good.

1、機器設備所設置的時間長短

1. The length of time set by the machine and equipment

由于超聲波清洗機的設置時間過短，產品工件沒法清理干凈；清理過程太長期會造成氣穴現象并危害表層光滑度，因而清理不一樣構件的時間設置會各有不同，充足的時間更有益于省時省力和達到適宜實際效果，因?yàn)槊恳粋€機器設備的化學性質是不一樣的，以在清理全過程中被挑選不一樣的清理溫度，否則用水或超聲波清潔器清洗，由于氣穴引起的物理清洗，其抗壓強度明顯高于低頻率。

Because the setting time of the ultrasonic cleaning machine is too short, the product workpiece cannot be cleaned; If the cleaning process is too long, it will cause cavitation and damage the smoothness of the surface layer. Therefore, the time setting for cleaning different components will be different. Sufficient time is more conducive to saving time and effort and achieving the appropriate practical effect, because the chemical properties of each machine and equipment are different, so that different cleaning temperatures can be selected in the whole cleaning process, Otherwise, the compressive strength of water or ultrasonic cleaner is higher than that of low frequency due to cavitation.
              

2、清洗空間的大小

2. Size of cleaning space

對于室內空間狹小，深層次的空隙孔，如果清理頻率不當，容易導致清理不全部，從而獲得足夠的清理實際效果，并避免與清理目標相沖突，清理液被適當?shù)剡x擇，它的選擇也有利于清理部件的其他成分，超聲波清洗機是在清理部件的設計方案中使用的設備，而清理模塊則是超聲波清洗，當在儲水箱內時，清理部件或清理工作不可觸碰儲水箱底端。

If the cleaning frequency is not appropriate, it is easy to lead to incomplete cleaning, so as to obtain enough actual cleaning effect and avoid conflict with the cleaning target. The cleaning fluid is properly selected, which is also conducive to the cleaning of other components. Ultrasonic cleaning machine is a professional equipment used in the design of cleaning components, The cleaning module is ultrasonic cleaning, when in the water storage tank, cleaning parts or cleaning work can not touch the bottom of the water storage tank.

選用密封環時，清理控制模塊的總橫截面應不超過超聲波槽橫截面占地面積的70%，橡膠材料和非彎曲剛度塑膠將消化吸收超聲波機械能，絕緣層清理構件也應造成需注意，假如應用有誤或產品工件過重，會導致超聲波清洗機系統軟件的效率減少。

When selecting the sealing ring, the total cross section of the cleaning control module should not exceed 70% of the area of the cross section of the ultrasonic tank. The rubber material and non bending rigidity plastic will digest and absorb the ultrasonic mechanical energy. The cleaning components of the insulation layer should also cause problems. If the application is wrong or the product parts are too heavy, the efficiency of the system software of the ultrasonic cleaning machine will be reduced.